Do you have water in your water softener? We are going to teach you how to drain it today!
We have over 25 years of experience in the water softener industry, and we would love to share our expertise with you.
We’ll discuss why your softener may be full of water, how to drain it, and what will happen if you don’t. Let’s get started!
Is Your Water Softener Full of Water? – Here’s How to Drain It
You can drain the brine tank of your water softener using a few different methods. Among them are:
1. USE A BUCKET:
By hand, remove all the water in the softener. After you fix the problem, if the water is still relatively clean. You can scoop it into a large container or your laundry tub so that you can use it again.
2. USE A WET-DRY VACUUM:
Wet-dry vacuums, also known as shop-vacs, can easily and conveniently suck out the water inside your water softener brine tank if you don’t like scooping it out by hand.
Wet-dry shop vacuums are specially designed to pick up wet as well as dry items. It’s important that you use a shop vac that works for wet as well as dry applications.
3. DUMP THE WATER:
It is not harmful to the environment to dump the water out of your water softener down a drain. The brine well must be removed first. Within your brine tank, this is the long cylinder that holds the safety float.
You can do this by taking out the float inside the tube and then removing the overflow elbow, if your unit has one. Pull out the cylinder last.
If you have a side-by-side water softener, you will also need to disconnect the fill tube that connects the brine tank to the head valve and its overflow hose.
4. MANUAL REGENERATION CYCLE:
By pressing and holding the “regenerate” button on your water softener, you can activate a manual regeneration cycle to empty a water softener full of water.
Your water softener automatically pulls all the water from the brine tank during regeneration, so you can remove the water by activating this cycle. When the regeneration cycle begins, make sure you press the button a second time to skip the brine cycle.
After your tank is empty, you can push the button to skip all of the other cycles and bring your water softener back to normal.
The method will only work if your water softener’s regeneration is functioning properly. If it is not, then you will need to drain the water from your unit using one of the first three methods.
WHAT COULD HAPPEN IF YOUR WATER SOFTENER DOESN’T DRAIN PROPERLY
A water softener full of water will not work properly.
During the regeneration cycle, if your softener is not fully draining. The brine tank will eventually fill up with water until the safety float is engaged.
You won’t be able to regenerate your softener because your brine solution will become too diluted. You will therefore have hard water.
COMMON CAUSES OF A WATER SOFTENER FULL OF WATER
Water softeners filled with water are caused for a number of reasons. Among them are:
- A kinked, clogged, or leaky brine drain on your softener may require repair. You can hire a professional to handle this for you.
- Your brine line isn’t properly connected to your brine tank and into the float: If your brine line isn’t properly connected to your float, water flows directly into your tank and the float will not shut it off.
- When your drain line flow control is clogged, it cannot regulate the amount of water flowing through your system. Clogs must be removed.
- The brine line flow control is clogged: If this becomes clogged, it will not be able to drain brine from the tank.
- You may have a salt clog at the bottom of your brine tank. A salt clog will prevent the flow of water.
- Your safety float may be sticking: If it is stuck, it needs to be cleaned in order to once again shut off the flow of water into your tank.
- Your injector is clogged: In this case, your injector will not be able to generate the suction necessary to remove water from your tank.
To learn more about how to solve each of these causes of a water softener full of water, read our post. “Water Softener Full of Water – Complete Step By Step Guide Of What To Do.”
Best Water Softeners:
SpringWell Futuresoft Salt-free Water Softener
The SpringWell FutureSoft uses a process called Template Assisted Crystallization (TAC). Which does not remove minerals from the water, but converts them into crystals that cannot adhere to surfaces and leave scale behind. Contrary to traditional water softeners, this softening system doesn’t waste water or reduce water pressure in your home.
This unit contains components that are NSF certified, and meet the high standards of performance, reliability and durability. SpringWell has been manufacturing water softening products for over 20 years, and provides a 6-month money-back guarantee.
With ActivFlow water technology, SpringWell FutureSoft ensures your household won’t experience a decrease in water pressure due to different flow rates.
Additionally, there is a pre-filter built into the system. The pre-filter removes larger sediment and contaminants like copper and silica from water.
Springwell Salt Based Water Softener System
With its innovative technology that is much more efficient than others, the SpringWell generates far less water waste by using automatic regeneration. Which allows the system to only regenerate when necessary, saving you money and reducing your environmental impact.
Bluetooth technology allows you to control settings of your system from your phone with the innovative Connected Series control head. Simply press a button to control backwash, regeneration, and timing. In the app you will also find information about how the system works and your water usage, as well as historical records.
Salt-based water softeners are ideal for families of any size seeking a dependable softener that won’t decrease water pressure. SpringWell is a great option if you need to spend just under $1,300 on a trusted brand.
SoftPro Elite
Water softener systems, like the SoftPro Elite. Use salt to soften water and are among the most efficient and affordable water softener systems. A control head built into the system ensures that it can be easily managed with automatic settings that control regenerations and system status checks. It requires virtually no maintenance.
Through a revolutionary upflow regeneration process, the SoftPro Elite provides a more accurate resin recharge, allowing you to save salt and water over the long term.
A short demand-driven regeneration cycle is triggered when the clean resin drops below a threshold of 3%. This is driven by next-generation sensors.
The SoftPro water softener comes with a user-friendly LCD screen that allows you to select from a variety of presets, including auto-variable backwash, vacation mode, and auto reserve.
The crosslink resin the softener uses should last up to 20 years. And it’s best water filter for you if you have large family.
There is a limited lifetime warranty included with the SoftPro Elite (except for components that wear out naturally). Circuit boards are covered for seven years, resin for ten years and tank softeners for life.
Keep Visiting Articleritz for latest updates